•  Mailbox
  •  Wechat
  •  +86-18833331920
UV coating
产品
0
UV Coating for PVC Resilinent Floor

Product overview

UV Coating for PVC Resilinent Floor

  • Introduction
  • Case show

This product is specially used for PVC coating on the surface of commercial coiled floor in hospital, office, sports and other places, and can also be used for the surface coating of PVC sheet and rubber sheet.

With excellent wear resistance, good flexibility, the best ductility and excellent anti pollution and high iodine tolerance.

Storage: cool, dry and ventilated place, storage at <40℃, avoiding light, away from fire source and heat source. The shelf life is 12 months. After overdue, it can continue to be used after inspection.

Transportation: prevent impact and extrusion, prevent insolation and transport according to general dangerous goods.

1.Avoid direct skin contact with the product,protective glasses and film gloves should be worn during operation.If the product is inadvertently splashed on the skin,wash with soapy water immediately.

2.The unused coating is closed and sealed in time to avoid contamination and stored in the dry and dark ventilation.

3.Voltage instability affects curing,UV lights need to be replaced regularly.Different types of UV coating have their best baking temperature and time.Pay attention to the reasonable choice.When the baking is insufficient, the coating is soft, the adhesion is poor, even if the iron sheet is stacked,it can cause adhesion.If the baking is excessive, the film is brittle.

         

 

        

 

All rights reserved : Mile New Photosensitive Material Co. Ltd.   ICP NO.:冀ICP备17000684号-1

冀公网安备 13020802000152号

Online QQ